Add a URL Filtering License to Unleashed

Ruckus won't let you buy a URL Filtering license for your Unleashed network unless you are the original purchaser of the APs.

If you have a used Unleashed AP and would like to enable URL Filtering, you may use the procedure here to apply a license.

Unleashed 200.14.6.1.203+

Patching is disabled on newer AP firmwares.

If your AP was released before mid-2022 then you can backup your configuration, temporarily downgrade to an older Unleashed firmware, apply the patch below, and then re-upgrade.

Make a note of your current software version - you'll need to upgrade to this exact version if you need to restore your configuration backup.

Unleashed 200.0 - 200.14.6.1.199

This patch should be uploaded as a Preload Image (Admin & Services > Administration > Upgrade > Local Upgrade > Preload Image).

TIP

The upload process completes the patching; no upgrade will be offered. Simply wait a few seconds after the upload, and the license should be enabled.

Creating the Patch Image yourself (from Linux or WSL)

Although the patch can be directly downloaded and used, I recommend either creating the patch yourself or decrypting the patch to verify it does only what it should.